5 Key Takeaways on the Road to Dominating

Standard Colors for Your Underground Utilities

If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Although not completely eliminated, risks today have been reduced. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. Otherwise it can be something disastrous. If you hit any of the underground utility lines while digging then you can be fatally injured. It can also interrupt services in your area where the line is located. People can call 811 to prevent these incidents, before they proceed with digging their property. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

Sometimes, even if the lines are marked accidents still happen. Utility lines are struck every 6 minutes, some place. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. Public heath and safety is affected when this happens.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. When locating utility lines underground, this machine makes it easy to do so. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.

Today, utility lines are marked with different colors for easy identification. Here are the colors used for different utilities.

Proposed excavation sites use white lines. Area that will be excavated in the future are marked.

If you see pink lines, they are temporary survey markings. Legal property boundaries are marked off by these pink lines.

Electric power lines, cable, conduit, and lighting cable use red lines. The color red is perfect for electric works because it is associated with fire and danger.

If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Lines for potable water use blue lines. Purple lines are used for reclaimed water, irrigation, and slurry lines. Sewer and drain lines use the color green. You can derail any project for a long time if you hit these lines.

You can learn more about the color coding of utility lines if you click here now! View here for more.